. . . . . . . . . . . . . . . . . . . . . .
Datecs Ltd.
www.datecs.bg
Page 12
PP-60 User Manual v1.0
PDA Installation
The PP-60 uses a top cover PDA snap/locking mechanism to hold
the PDA securely in place. Care must be taken when installing the
PDA to PP-60.
1.
Remove the PDA cover as
shown in the figure on the
right. There are 4-snap
locking
mechanisms
on
each corner of the cover.
Figure 9
2.
Flip the PDA cover and take
care not to damage the 4-
pins. Insert the USB connector
into the PDA as shown in the
figure on the right.
Figure 10
3.
Flip cover over then insert
the 4-pin header into the
connector before securely
snapping the cover back in
place as shown in the
figure on the left.
Figure 11