DT4200
78
20181113-V0
•
:
It switches ON, when (measured value < low
limit) OR (measured value > high limit)
The output switches ON, when the displayed value is lower
than the numerical value defined as the
parameter
OR higher than numerical value defined as the
.
Example for the application:
It indicates that the measured value out of the desired
limits.
Displaying the limit
values
(Switching the displaying on: from the
04.LD
menu item.)
•
Both outputs are OFF:
•
Output 1 is ON, output 2 is OFF:
•
Output 1 is OFF, output 2 is ON:
•
Both outputs are ON:
If the Alarm Mode is ON, and the given output is in alarm
status, the above displays appear blinking. The blinking
stops only when the acknowledgement is done manually
(Upon pressing the
ENTER
button).
Summary of Contents for DT4200
