Datcon DT4200, Operating Instructions Manual

Page: 40 / 84

DT4200
40
20181113-V0
Sequence of operations 6. Pressing the ► button you can select the next digit.
7. Pressing the ▲ button you can increase the value of the
blinking digit:

,

,

,

,

,

,

,

,

,

, etc.
8. When the last digit (right-side) is being selected, and you
press the
► button, a blinking colon appears on the left
side:

. The colon indicates that the plus/minus
sign is being selected, and it can be modified by pressing
the
▲ button.
9. Pressing the ▲ button you can switch the minus sign on
or off.
•

= 3.456
•

= -3.456
Exit from the menu item 1. After finishing the setting, press the MENU button, to exit
from the menu item, and you see this:

.
(2. If you want to change the setting you have done just
now, or if you just want to check what you have typed in, go
on with the operation from point 3 of the
Sequence of
operations .)
(3. If you don’t want to exit the menu, as you want to do
further settings, then you may select the desired menu
items by pressing the
▲ button.)
Exit from the menu
1. Press the MENU button. First the mnemonic

( Save ), then the mnemonic

( Exit ) are shown on the
display. With this the storing of the settings is completed.
The instrument has exited the menu and goes on with the
measurement.