Datcon DT1364, Operating Instructions Manual

Page: 22 / 36

DT1364
22
20171206-V0
9. Appendix
9.1. Technical specification
Intrinsical safety data
Certification: BKI 14 ATEX 0012, BKI 14 ATEX 0012/1
Marking: II (1)G [Ex ia Ga] IIC/IIB (-20 °C ≤ Ta ≤ +50 °C)
II (1)D [Ex ia Da] IIIC (-20 °C ≤ Ta ≤ +50 °C)
Safety data: DT1364
IIC IIB
Uo Io Po
Co Lo Co Lo
Limit outputs safety data:
8.61 V 11.6 mA 24.96 mW 2 µF 100 mH 20 µF 200 mH
Um: 250
Veff
Input parameters:
Number of inputs: 2
In compliance with the standard EN 60947-5-6 (NAMUR):
No load voltage:
8.2 V
Short circuit current: 8.2 mA
Input resistance: 1000 ohm
Low-current input version, upon request:
No load voltage:
8.2 V
Short circuit current: 0.5 mA (max.)
Input resistance: 18 kohm
Output parameters:
Number of outputs: 2
Contacts: SPDT contact
Contact rating: 250 VAC, 5 AAC, 500 VA or
30 VDC, 5 ADC
Galvanic isolation:
Operating isolation voltage: 250 Veff (between the input, the output,
and the supply voltage terminals)
Test voltage: 2500 VDC (between the input and the
output terminals; between the input and the
power supply terminals)
Power supply:
Supply voltage: 19-29 VDC
Consumption: 2.1 W