DT1102 (PS)
20220202-V0
21
7. Fault rectification
7.1. Fault finding
The fault finding must be carried out by trained and authorized
personnel only!
The improper working may caused by the connected instruments,
wrong settings or connection, defect of the power supply or defect of
the instrument.
First check the settings. When the settings are OK continue fault
finding:
•
Green “on” indicator dark
→
check the power supply.
If the power supply OK: the instrument is defective.
•
Green “on” indicator lights, red “error” indicator flashes 1/sec
periodically: the instrument is defective.
•
Improper output signal
→
disconnect the signal processing unit from
the output, check the input signal and the transmitter supply (when it
is in use). If the input signal and the transmitter supply are OK: the
instrument is defective.
When the result of fault finding is that the DT1102 (PS) is defective
call the manufacturer service department.
7.2. Repearing
There is no user repairable part inside the instrument.
In accordance with Point
2.1.: For safety and warranty reasons, any
internal work on the instrument must be carried out only by
DATCON personnel.
