RESET – return the remote to wired mode
To return the WR-500 remote to wired mode from Bluetooth mode simply
press and hold the Play Pause button until the
GREEN
LED stops
flashing
and becomes a steady GREEN light.
When a
RED
LED is shown on button presses the remote is in wired
mode.
Frequently Asked Questions
Q1: Can the remote be used with Apple tablet and smart phone
devices?
A1 : Yes, in wired or Bluetooth modes.
Q2: Can I replace the internal CR2032 battery?
A2: Yes, carefully open the remote and locate the battery slot on the PCB.
Q3: Can the remote be used with Android tablet and smart phone
devices?
A3: It will work with most Android tablets and some smart phones. Check
first if your device supports Bluetooth 4. If using wired mode check the
mini jack socket supports microphone input.
Q4: Can the remote be used to control several devices at once?
A4: Yes, but only when using the DVP-100 product (extra purchase).
Q5: How do I switch the unit off?
A5: The device will automatically turn off after 30mins of being left idle.
Q6: Where can I find instructions for the free DV Prompter App?
A6: A separate PDF manual is available for download from our website
www.datavideo.com
Q7: Will this remote work with other apps?
A7: The remote has no compatibility in other, third party, applications.