THROUGH THE LENS KIT FOR TLM-700 TTL-100
11
Cleaning the 60/40 Glass
This product contains a sheet of 60/40 glass please handle it with care.
To avoid a risk of damage or injury please follow this instruction manual and use caution when
transporting, un-packing, cleaning, assembling or dis-assembling this part of the product.
Datavideo recommend cleaning the glass regularly to remove dust and finger print marks. This will
ensure the best image quality is recorded when the camera is looking through the glass.
Never attempt to clean the glass whilst it is mounted
instead remove it carefully, clean the glass and then re-install it
into the hood. Handle the glass carefully using the cloth covered edges of the glass at all times.
To retain the required qualities of the glass and to avoid scratching the glass during cleaning.
Never use
abrasive cloths, pads or abrasive based cleaning fluids on the glass.
Never use
cleaning fluids based on an acid or vinegar solution.
Place the glass on a soft, stable, dirt and lint free work surface
such as a table with a clean cloth already laid out on it. Then use
a second clean, lint free, soft cloth to clean the glass.
Do not apply cleaning fluids to the glass directly, instead apply
or spray a small amount of the cleaning fluid onto the cloth.
Proceed to clean the glass and work in a light circular motion
with the cloth. Ensure all finger marks and streaks are gone
before turning the glass over and repeating with the other side.
Once finished re-install the glass back into the hood, again using the cloth covered edges only.
Ensure the green circle
sticker on the glass is facing you
and the red circle sticker is facing the camera lens. Reseat/secure the camera hood if
necessary.
