7
Functions - Front Panel
1.
Each monitor has a two colour tally light indicator which
can be connected to the Datavideo RMC 140, SE500 or
similar products. AMBER indicates Cued and RED
indicates Live.
2.
Each Monitor has individual adjustments for Brightness,
Contrast, Colour and Tint (Tint is for NTSC only).
These four adjustments can be adjusted with a X headed
screwdriver.
It is recommended that you use a Test Pattern to adjust
the monitors.
3.
The ASPECT button switches the aspect ratio from 16:9
and 4:3.
4.
Source select switches between video input 1 and video
input 2. (Each monitor has a choice of two video inputs)
5.
Power On / Off switches the monitor On or Off
6.
On either side of the TLM-702 are small Allen Key screw
tension adjustments. These alter the tension on the
pivoting mechanism. If you want to change the angle of
the monitors, i.e. aim them up or down, you can loosen
these screws and adjust the TLM-702. Once you have set
the correct angle tighten the screws back up.