10
Function Button - pixel zoom feature
This feature is designed for use with HD-SDI and HDMI sources above 720p resolution. Press this button to
zoom in to the video on the display. This is strictly a zooming function and does not alter the native aspect
ratio of the source pixels to fill the screen.
The
FUNCTION
button allows you to toggle the Pixel Zoom feature between
zoom x1, x2, x4
and
x8
.
When turned ON the zoomed display may be moved left or right using the
VOL + /-
ZOOM
keys and up or
down using the
up/down
keys.
A Flashing
FUNCTION button light
will be activated whenever you are in a zoomed mode as a
reminder/warning that the entire incoming signal is not being shown on the monitor.
To exit zoomed mode, simply press down on the MENU key. To exit the Pixel Zoom feature entirely simply
press the MENU button once more.
Menus
The TLM-170P is set up using an OSD menu system. To display the OSD menu press the MENU button.
This menu system is navigated using the Up / Down buttons to change a value or to highlight a menu option.
Press the Enter button to select an option or to confirm a value.
MAIN MENU
You can choose:
MAIN ADJUST
COLOR ADJUST
SCAN SETTING
INFORMATION
PIP SETTING
LANGUAGE
SETUP MENU
SPECIAL FUNCTION I
SPECIAL FUNCTION II
SETUP NETWORK
SETUP F. W.
FACTORY RESET
AUDIO CONTROL
EXIT
MAIN ADJUST
You can choose:
BRIGHTNESS 0~100
CONTRAST 0~100
SHARPNESS 0~100
SATURATION 0~100
TINT 0~100
BACK LIGHT
0~100
3D COMB
DISABLE / ENABLE
NR
HIGHD / MID / LOW / OFF
MPEG NR
HIGHD / LOW / OFF
DLC
DISABLE / ENABLE
VOLUME 0~100
EXIT
3D COMB
is for video noise suppression.
NR
is for video Noise Reduction.
MPEG NR
is for MPEG format Noise Reduction.
DLC
is for Dynamic Luminance Control.
