7
External Gen-Lock Sync Input & Output
(BNC loop through)
The TBC-5000 will lock on to the input sync signal supplied and use this
for synchronization of the connected inputs.
The TBC-5000 will also output the supplied sync signal for connection to
other equipment.
Power On/Off Switch
Switches power to the unit On / Off
Dip Switches / Mode Select
AGC: Automatic Gain Control (channel 1~4)
VTR: Revision picture quality when VHS source in (channel 1~4).
1
2
3
4
5
PAL/NTSC PAL
50/60Hz AGC1
VTR1
AGC2
6
7
8
9
10
VTR2 AGC3 VTR3
AGC4
VTR4
Note:
Reboot the TBC-5000 if you have changed a DIP Switch position
Grounding Terminal
When connecting this unit to any other component, make sure that it is
properly grounded by connecting this terminal to an appropriate point.
When connecting, use the socket and be sure to use wire with a cross-
sectional area of at least 1.0 mm.
DC In Socket
Connect the supplied 12V 1.5A PSU to this socket. The connection can
be secured by screwing the outer fastening ring of the DC In plug to the
socket.
