10
Calibrating the T-bar
1. Turn off the SE-2800.
2. Press and hold buttons In1
PRESET
and In1
PROGRAM
(1. 2. Fig-A)
3. Turn ON SE2800 - only 2 LED will flashing - T-Bar bottom and T-Bar top (3. 4 Fig-A)
4. Set the T-Bar in top position ( ~1mm befor to end) and press CUT.
5. Set the T-Bar in bottom position ( ~1mm befor to end) and press AUTO.
6. Press button CLOCK for finish.(5. Fig-A)
Fig-A
