Datavideo PTR-10T, Instruction Manual

Page: 18 / 40

18
4.3 Remote OUT
In the OSD menu, there are four connection modes available in the Remote OUT Mode option for
the user to select in order to connect your PTR-10T MARK II device to the camera mounted. The four
modes of connection are BX Lens, LANC, RS-232C and RS-422.
If BX Lens or LANC is selected, use the Remote Port to connect. If RS-232C or RS-422 is selected, use
the RS-232/422 OUT port to connect.
Remote Port
The Remote port, when connected to the camera mounted , allows you to access certain functions of
various camera brands such as ZOOM and FOCUS . To use this function, you will need to first enable
LANC or BX-Lens mode by accessing the OSD menu option, Remote Out Mode , on your PTR-10T
MARK II device. Follow the menu path below:
4. Remote Control

6. Set Remote Out

1. Remote Out mode

LanC or BX-Lens
LANC
If the LANC mode is enabled, connect the Remote port of PTR-10T MARK II to the camera’s 2.5 mm
earphone jack via a remote cable. The remote cable is an 8pin mini-din to 2.5mm phone jack cable as
depicted below. The pinout information is also shown.