Datavideo PTR-10MKII, Instruction Manual, Page: 37 / 48

37
First Level
Main Options
Second Level
Sub-Options
Third Level
Parameters
Fourth Level
Parameters
Sub-Option
Description
1.0
1.2
5. Display
P/T OSD
PAN OSD ON/OFF
TILT OSD ON/OFF
CZOOM OSD ON/OFF
FOCUS OSD ON/OFF
ESCAPE
Debug OSD
DEBUG IR OSD ON/OFF
DEBUG CAM.
OSD
ON/OFF
DEBUG RS422
OSD
ON/OFF
DEBUG DVIP OSD ON/OFF
DEBUG M_CTL
OSD
ON/OFF
DEBUG REG. OSD ON/OFF
DEBUG VOUT
TEST
ON/OFF
ESCAPE
ESCAPE
6. Reset All YES/NO
7. Update Software
SW VERSION ESCAPE
MB CPU V00.49a
MCTL CPU V00.31
UPDATE ALL YES/NO
ESCAPE
8. Escape
7. Reset
Pan/Tilt
Reset Pan/Tilt YES/NO
8. Escape
4.6 Zoom Sensor mini-DIN Port
The zoom sensor mini-DIN port allows you to connect the ZEK-1 Zoom Encoder Kit, which is an
electromechanical device that adds automatic zoom positioning to the camcorder mounted on PTR-
10/10T MARK II Robotic Pan Tilt Head. See the ZEK-1 user manual for installation instructions.
With the ZEK-1 installed, you can set P/T Acceleration and P/T Speed to Auto (recommended) for
smooth PTZ camera control.
The P/T Acceleration defines the rate at which the pan and tilt movement will reach its top speed.
When set to Auto, the acceleration changes according to the zoom direction. When zooming out, the
acceleration increases for responsive PTZ movement; when zooming in, the acceleration decreases for
smooth PTZ movement.
The P/T Speed defines how fast or slow the pan and tilt movement will be. The PTR device offers 18
levels of speed of P/T movement. When set to Auto, the speed changes according to the zoom