Datavideo PTR-10MKII, Instruction Manual, Page: 29 / 48

29
No. Buttons Descriptions
14
Menu Button
Enter or Exit Menu Options
15
Zoom In / Out
Buttons
Zoom
Press either (T) TELE button to zoom in on the subject such that it
appears to be close to the camera or (W) WIDE button to zoom out
from the subject such that it appears to be far away from the
camera.
16
Zoom Speed Button
(4 speed selection)
Adjust Zoom In/Out Speed
Press button 1/2/3/4 to switch between different speeds with 1
being the highest and 4 being the lowest.
17
Standby Button
Press to enter PTR-10 MARK II into standby mode and press again
to wake the device from standby mode.
OSD Menu
The OSD menu allows you to modify various device settings such as pan and tilt and control protocols.
Pressing the menu button on your remote control opens the OSD menu shown below.
OSD MENU
1. Set Camera
2: Set Motor
3: Memory
4: Video Mode
5: Remote Control
6: System
7: Reset P/T
8: Escape