11
With a DVCPRO HD camera recorder, the tape is cued to
provide continuity from one shot to the next when this
button is pressed while playback is paused.
Note
: The REW and FF functions may be modified during
the firmware upgrade process.
SHORT MARK
Press this button during recording or playback to record
shot mark 1.
ND (ND filter) select switch and indicator
Use this switch to select the ND filter. Press the switch
upward to change the ND filter in order and downward to
change the ND filter in the reverse order. The ND
indicator displays the currently selected ND filter. This
switch is disabled for a camera not equipped with an ND
filter servo system or a camera without ND filters.
CC (color temperature conversion filter) select switch
and indicator
Use this switch to select the CC filter. Press the switch
upward to change the CC filter in order and downward to
change the CC filter in the reverse order. The CC indicator
displays the currently selected CC filter. This switch is
disabled for a camera not equipped with a CC filter servo
system or a camera without CC filters.
Note
: The FILTER ND / FILTER CC functions may be
modified during the firmware upgrade process.
DETAIL
In Remote Control mode, press and light this button to
enable the Detail function.
Menu
When this function is enabled, the button is back lit
orange and the OSD menu is shown on the LCD
panel/view finder of the camera. This OSD menu may also
be shown on the AD-1S’s composite output (if supported).
Some camera models also allow this OSD menu to be
displayed on the SDI or HDMI output of the chosen
camera. Refer to your cameras manual for more details
on its OSD Menu outputs and change settings where
necessary.
