Datavideo MCU-100, User Manual

Page: 16 / 18

16
How to update the AD-1 firmware with the NuMicro ISP Programming Tool
Install the software tool by using the “Setup, NuMicro ISP
Programming Tool, v1.42
”
on your Windows 7 PC.
Connect the USB cable to the AD-1 Micro USB port and then to
your PC.
Use the desktop Icon to launch the software tool.
Select
“
Connect
”
Click on the
Load File “APROM” button and then browse to the
location of the Firmware bin file.
Click on the
Program “ APROM ” radio button, and then click on
the “ Start ” button to begin the update process.
A firmware update progress bar will be shown at the bottom of the
window.
Once finished the program will show PASS and then disconnect
the AD-1.
Remove the USB Cable and then connect the AD-1 to the
camera’s remote port to test the new firmware.
Note: It is best to update the firmware of the AD-1 unit(s) at the same time as the MCU-100 .
Specifications
Power Consumption DC 12V / 0.5A ( 6W )
Weight 350 g
Dimension 95mm (W) x 208mm (H) x 54mm (D)
Input /Output Connection RJ45 x 4
Connection Distance Up to 300m (CAT-5 or CAT6)