17
1.
On the front panel of the base unit, press
SHIFT
and
HOLD
buttons then hold for
more than 3 seconds to enter the
ITC-300 Intercom System
in
PP mode
.
Once in the
PP mode
successfully, you will see the following button LED behaviors.
-
ALL
,
HOLD
,
MUTE
and
SHIFT
buttons will be illuminated in white.
-
Paired channel buttons will be illuminated in red.
-
Unpaired channel buttons will be illuminated in green.
2.
On the Beltpack, press
CALL
and
TALK
buttons for more than 3 seconds to enter
the
PP mode
.
You will see the following button LED behaviors after the beltpack enters the
PP
mode
.
-
The
tally indicator
will flash once.
-
The
CALL button LED
will be turned ON.
GREEN
: The beltpack has not been paired to any channel buttons.
RED
: The beltpack has been paired to a channel button.
-
The function keys (
ALL
,
HOLD
,
MUTE
and
SHIFT
) on the front panel of the
ITC-300 Intercom System
will be illuminated in red.
3.
On the front panel of the
Base Unit
, press the channel button to be paired to the
beltpack
. The selected button should turn from green to yellow.
4.
On the beltpack, press the
TALK
button to start pairing. Once pairing is successful,
the beltpack’s
CALL
button LED and the selected channel button on the base unit
should flash red three times. Then the
beltpack
exits
PP mode
and return to
OPERATION mode
.
5.
After the pairing procedure is complete, the
ITC-300 Intercom System
will still
remain in the
PP mode,
the paired channel button will be illuminated in red and
ALL
,
HOLD
,
MUTE
and
SHIFT
buttons will return to white from red. To pair the
next beltpack, repeat the process from step 2. To exit the
PP mode
, simply
disconnect the ITC-300’s power.
Check the Beltpack’s Paired Channel with the Base Unit
Reboot the beltpack, and the tally light flashes or red. The number of flashes indicates
the beltpack’s paired channel with the base unit.
Clearing Channel Assignment
1.
On the
ITC-300 Intercom System
, press
SHIFT
and
HOLD
buttons then hold for
more than 3 seconds to enter the
ITC-300
into
PP mode
.
2.
Once in the
PP mode,
paired channel buttons will be illuminated in red.
3.
To clear one particular channel’s current channel assignment, press and hold the
channel button for more than 3 seconds.
