7
How to fit a SATA drive to the removable HE-1 enclosure
Datavideo recommends using 2.5” SATA HDD 7200 RPM with 8 or 16 MB cache. If your unit was
delivered without a hard drive fitted please follow these instructions to fit your drive to an empty HE-1
drive enclosure. Compatible drive information can obtained from your local dealer or Datavideo office.
1. Remove the two small screws from the
connections end of the removable HE-1
drive enclosure then remove the PCB.
2. Seat your
2.5” SATA HDD on to the PCB
and then turn it over so you can secure
the drive to the PCB using the four
screws holes provided.
3. Return the PCB, with HDD fitted, to the
enclosure, using the slots within the
enclosure case as a guide.
4. Re-secure the back plate of the
enclosure using the two screws removed
earlier.
5. Push the removable HE-1 enclosure into
recorder as shown left. Now turn the
locking lever to the left to secure it in
place.
6. You are now ready to switch the unit on.
7. New drives will be formatted within the
recorder on first use. The LCD panel will
show BIN and CLIP information once the
drive becomes available for use.
