background image

 

 

 42 

 

Service and Support

 

It is our goal to make your products ownership a satisfying experience. Our supporting staff is available to 
assist you in setting up and operating your system. Please refer to our web site www.datavideo-tek.com for 
answers to common questions, support requests or contact your local office below. 
 
Datavideo Global Website: 

www.datavideo-tek.com

 

 

Datavideo Corporation 

Tel: +1 562 696 2324 

Fax: +1 562-698-6930

E-Mail: [email protected] 

 

Datavideo Technologies Europe BV 

Tel: +31-30-261-96-56 

Fax: +31-30 261-96-57 

E-Mail: [email protected] 

 

Datavideo UK Limited 

Tel: +44 1457 851 000 

Fax: +44 1457 850 964 

E-Mail: [email protected] 

 

Datavideo Technologies Co., Ltd 

Tel: +886 2 8227 2888 

Fax: +886-2-8227-2777 

E-mail: [email protected] 

 

Datavideo Technologies China Co., Ltd 

Tel: +86 21-5603 6599 

Fax:+86 21-5603 6770 

E-mail: [email protected] 

 

Datavideo Technologies (S) PTE Ltd 

Tel: +65-6749 6866 

Fax: +65-6749 3266 

E-mail: [email protected] 

 

Datavideo HK Ltd 

Tel: +852 2833 1981 

Fax: +852-2833-9916 

E-mail: [email protected] 

 

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
All the trademarks are the properties of their respective owners.  
Datavideo Technologies Co., Ltd. All rights reserved 2018.

                                       

 
 

P/N: G082060483E4

 

 

Summary of Contents for DN-500











































Reviews: