10
SELECT GPI FUNCTION
- The GPI function can be set to either Play /
Play Pause or Record / Record Pause.
See GPI Mode & Function
Menus for more details.
SET DATE & TIME
- Sets the date and time on the DN-500; the
setting is non-volatile so it is stored when the unit is powered off.
See
Set Date & Time Menu for more details.
SET DV TC. STAMP –
When enabled allows the unit to record the
Time Code stamp from a DV input.
SET FULL SYT
- Occasionally DV devices can suffer from conflicts. In
the event of the DN-500 conflicting with another device Set Full Syt is
enabled to overcome the conflict.
FORMAT HARD DISK
- Formats the HDD and removes all files and
tracks from the DN-500.
See Format Hard Disk Menu for more
details.
ERASE TRACK
- Erases individual tracks from the DN-500.
See Erase Track Menu for more details.
CONVERT DV TO AVI
- Converts DV files to .AVI files for greater NLE
compatibility.
See Convert DV to AVI Menu for more details.
SET OUTPUT CHANNEL
- Allows the output channel of the DN-500 to
be switched to a different I.D. number. This is important if there are
any conflicts between DV Devices.
See Set Output Channel Menu
for more details.
HDD SURFACE SCAN -
Checks the HDD for errors / bad sectors.
This is only necessary if your DN-500 is not performing correctly, or
you install a new HDD. A result.txt file is created in the root directory of
the HDD, this can be viewed from a PC.
REC. 16:9 DV STREAM –
Allows the user to enable or disable 16:9
recording from a DV stream or DV input. If disabled then the track
recorded will default to 4:3 aspect when viewed with other devices.
SELECT 16:9 MODE –
Allows the user to choose between 16:9
Anamorphic and 16:9 Letterbox modes when recording tracks.
HDD MODE CABLE LEN.
The DN-400 unit has two types of cable mode that can be set when
connecting the DN-400 unit to either a PC or MAC.
LONG DISTANCE CABLE
- If your IEEE 1394 cable length
≦
20 M
SHORT DISTANCE CABLE
- If your IEEE 1394 cable length
≦
1.8 M
POWER ON DEFAULT –
Allows the user to choose the default
recording mode at power on. The user can choose between DV/HDV
Input or an Analogue Input (
Video Input
button is On at start up).
FIRMWARE VERSION
- Display the Firmware Version of the DN-500
for Mother Board (MB) and Front Panel (FP). Please register your unit
with your local Datavideo office for updates on new firmware.
