manualshive.com logo in svg

Datavideo DN-400, Instruction Manual

Share
Download
Datavideo DN-400 Instruction Manual Download Page 30

 

 

 

  

30

 

Connection to PC when HE-1 drive caddy is still inside DN-400 

 
NB: Although a PC may see the DN-400 as an AVC compliant DV Device it is not intended to be 
operated as such. The AVC command set is not supported. 
 

If your PC sees an AVC DV Device select Take No Action. 
 

 

 

 

Connect the DN-400 IEEE-1394 output to a PC. 
To set the DN-400 into HDD Mode firstly press the Menu button so that it is illuminated.

  

You will see the display change to the HDD Mode Menu 

 

 

Press the Next (

▲

) Button to select ENTER and the display will show the HDD Enable Confirmation Screen 

 

 

Press the Next (

▲

) Button again to confirm, after a few seconds HDD Mode will be enabled 

 

 

 

The PC should recognise that an external IEEE-1394 (Firewire)HDD has been connected. Select Open 
Folder to View Files. The drive should also appear in My Computer as an internal HDD. Once connected the 
DN-400 can be used just like any HDD. You can select the required files and drag and drop them to the 
required destination. 

Summary of Contents for DN-400











































Reviews:

No comments

Brands by name

Popular brands

Load more brands