background image

 

12.

 

Except as specifically explained elsewhere in this manual, do not attempt to service 
this product yourself. Opening or removing covers that are marked “Do Not 
Remove” may expose you to dangerous voltage points or other risks, and will void 
your warranty. Refer all service issues to qualified service personnel. 

13.

 

Unplug this product from the wall outlet and refer to qualified service personnel 
under the following conditions: 
a.

 

When the power cord is damaged or frayed; 

b.

 

When liquid has spilled into the unit; 

c.

 

When the product has been exposed to rain or water; 

d.

 

When the product does not operate normally under normal operating 
conditions. Adjust only those controls that are covered by the operating 
instructions in this manual; improper adjustment of other controls may result 
in damage to the unit and may often require extensive work by a qualified 
technician to restore the unit to normal operation; 

e.

 

When the product has been dropped or the cabinet has been damaged; 

f.

 

When the product exhibits a distinct change in performance, indicating a need 
for service. 

 

Warranty 

Standard Warranty 

 

Datavideo equipment is guaranteed against any manufacturing defects for one year 
from the date of purchase.  

 

The original purchase invoice or other documentary evidence should be supplied at 
the time of any request for repair under warranty.  

 

Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not 
covered by this warranty.  

 

All mail or transportation costs including insurance are at the expense of the owner.  

 

All other claims of any nature are not covered.  

 

Cables & batteries are not covered under warranty.  

 

Warranty only valid within the country or region of purchase.  

 

Your statutory rights are not affected.  

Summary of Contents for DAC-50S

















Reviews: