18
Troubleshooting
1-
When using some camcorder models as a DV source, the DV signal may be lost if
you try to unplug the iLink cable from the DAC-5 during the transmission. To recover
from this situation, turn the camcorder off and then on again.
2-
Turn-on the DAC-5 before launching any editing software
3-
Macintosh users will have some problems if they try to toggle the video format (525 to
625 or 625 to 525) in the same session; they will not be able to correctly process the
video sequences in the new format. The DAC-5 must be powered on and in the right
video format (even if no input signal is connected to the unit) before attempting to
start the computer and launch the editing software.
*. Please refer to following setting to work with a MAC Final Cut Pro.
1). Select "Preferences" from Final Cut Pro menu
2). Select "General" page
3). Uncheck "Abort capture on dropped frame"
4). Uncheck "Abort capture on time code break" for Final cut pro 3.0
5). Click OK button
