Datavideo AD-200 Main Unit, Quick Start Manual

Page: 7 / 12

- 7 -
Connection AD-200 main unit and AD-200 control unit
AD-200 Main Unit
AD-200 Control Unit
Audio Inputs and Levels
There are two kinds of switches under
AUDIO IN:
The
LINE/ MIC+40dB/ MIC+60dB
switch is used to set the audio as LINE in or MIC+40dB or MIC+60dB in. When
LINE in is selected please also set the
48V ON/OFF
switch to
OFF
in order to prevent burn-out damage to the circuit.
The
48V ON/OFF
switch is for phantom power. If you want to use MIC in, please set the
LINE/ MIC+40dB/ MIC+60dB
switch first, and then if using a Condenser microphone turn ON the
48V ON/OFF
switch. If you wish to use a Dynamic
microphone please turn OFF the
48V ON/OFF
switch.
*NOTE: Always double check the manual for the microphone being used to see what advice it gives regarding
power as some Mics have internal batteries too.
D-SUB Cable
Connect Cable