Datavideo AD-200 Main Unit, Quick Start Manual

Page: 10 / 12

- 10 -
Specifications
Parameter Specification Limit Units Conditions/Comments
AUX IN
MIC/Line Connectors (CH5~CH6) 3Pin XLR Female Pin2=(+),Pin3=(-),Pin1=GND
Mic/Line Input Impedance(CH5/CH6) 6.8K/300K Ω
Mic Gain Range off to +20 ±3 dB Audio source GAIN(knob)
Line Gain Range off to +20 ±3 dB Audio source GAIN(knob)
THD+N 0.01 max % @1KHz,0dB(Lin IN)
Line in Max Level +23dBu ±3% dBu
Signal to noise ratio 75 min dB @1KHz,0dB(Lin IN)
Frequency Response 20Hz~20KHz ±3 dB
Audio IN
Input (CH1~CH4)
Connectors 3Pin XLR Female Pin2=(+),Pin3=(-),Pin1=GND
Input Impedance 300K Ω
Gain Range off to +20 ±3 dB Audio source GAIN(knob)
Signal to noise ratio 75 min dB @1KHz,0dB
THD+N 0.01 max % @1KHz,0dB
Frequency Response 20Hz~20KHz ±3 dB
unbalanced mono audio (L, R) RCA
Signal to noise ratio 80 min dB @1KHz,0dB(RCA IN)
THD+N 0.01 max % @1KHz,0dB(RCA IN)
Impedance 20K 1% Ω
Audio Output
Connector (1,2,3,4)(Group A,B) 3Pin XLR Male Pin2=(+),Pin3=(-),Pin1=GND
Impedance 60 1% Ω
Gain Range off to +20 ±3 dB OUTPUT (Group A.B)(knob)
Output Max Level +23dBu ±1.5% dB
unbalanced mono audio (L, R) RCA
Gain Range off to +20 ±3 dB OUTPUT (Group A.B)(knob)
Impedance 300 1% Ω
Headphone
Connector 3.5mm phone jack Tip(+),Ring=(-),Sleeve=GND
Signal to noise ratio 70 min dB @1KHz,0dB(Lin IN)
THD+N 0.01 max % @1KHz,0dB(Lin IN)
Frequency Response 20Hz~20KHz ±3 dB
Others
Phantom Power +48V ±3% VDC
Power Consumption 12V/19W ±3% watts
Power Input connector 2pin DC Jack Pin4=(+),Pin1=GND
Dimensions (Main Unit) 147 x 440 x 45.4 ±1% mm L X W X H
Dimensions (Control Unit) 90.5 x 440 x 47.5 ±1% mm L X W X H
Weight Main Unit 1.8kg / Control Unit 1.1kg kg
OLED 1,77" TFT 160XRGBX128
Audio Delay for audio input 0~3 sec