Datavan Pyramid 150, User Manual

Page: 6 / 26

6
CHAPTER 1 INTRODUCTION & KEY FEATURES
1.1 Introduction
Congratulations on your purchase of the Pyramid Touch LCD Monitor, one of the sturdiest and
most versatile touch-screen displays on the market. The following introduction will help you to
familiarize yourself with your new Pyramid LCD.
1.2 Taking care of your Pyramid LCD
1.2.1 Precautions
Read all of these instructions and save them for later use.
Follow all warning and instructions on the product.
◎
Product
Do not cover or block the vent holes in the case.
Do not insert sharp objects or spill liquid into the LCD monitor through its cabinet slots. This may
cause accidental fire, electric shock or device failure.
Disconnect the power plug from the AC outlet if you are not using the device for an indefinite
period of time.
Do not attempt to service this product yourself, as opening or removing covers may expose you
to dangerous voltage levels or other risks.
Please do not apply pressure on the touch panel using pointed or hard objects.
◎
Plugs
Do not remove any of the prongs of the monitor’s three-pronged power plug.
Disconnect the power plug from the AC outlet under the following conditions:
If you will not use the device for an indefinite period of time.
If the power cord or plug is damaged or frayed.
If the product does not operate normally when the operating instructions are followed.
Adjusting the controls may result in damage and will often require extensive work by a
qualified technician to restore the product to normal operation.
If the product has been dropped or the cabinet has been damaged.
If the product exhibits a distinct change in performance, indicating a need for service.
◎
Power and extension cords
Do not allow anything to rest on the power cord.
Do not locate this product where persons may walk on the cord.
Use only the proper power cord with the correct attachment plug type. If the power source is
120V AC, use a power cord that has UL and C-UL approval. If the power source is a 240V AC
supply, use the tandem (T blade) type attachment plug with ground conductor power cord that
meets the respective European country’s safety regulations, such as VDE for Germany.
1.2.2 Cleaning
Gently wipe screen with a clean camel hair lens brush, or a soft, clean, lint-free cloth.
This removes dust and other articles that can scratch the screen.
Do not apply pressure to the screen surface when wiping it clean.
Do not pour or spray any liquid directly onto the screen or LCD monitor casing.
Chemical cleaners have been reported to damage the screen or the LCD monitor.