ST
Scan Time Per Line
0
0 ms, VR = normal
0 ms, VR = fine
1
5 ms, VR = normal
5 ms, VR = fine
2
10 ms, VR = normal
5 ms, VR = fine
3
10 ms, VR = normal
10 ms, VR = fine
4
20 ms, VR = normal
10 ms, VR = fine
5
20 ms, VR = normal
20 ms, VR = fine
6
40 ms, VR = normal
20 ms, VR = fine
7
40 ms, VR = normal
40 ms, VR = fine
To display the cFDCC parameter settings, issue command
+FDCC?.
Current Session Results
+FDIS=
Syntax
：
+FDIS=VR,RB,WD,LN,DF,EC,BF,ST
This command determines how the faxmodem returns the negotiated
T.30 parameters for the current session. See the +FDCC= section for
parameter definitions. CFDIS=? displays the help message
of this command.
Begin or Continue Phase C Data Reception
+FDR
This command initiates a transition to Phase C data reception and
forces a transition in the control software from command parsing to
background processing.
Note that you can only issue this command at the moment when
negotiation is complete and upon entering Phase C. Issuing this
command at any other time results in an ERROR message.
Page: 100
