DATASONICS PSA-916, User Manual, Page: 13 / 26

PSA-916 Sonar Altimeter 3-2
Setup and Deployment Connection
Prior to reassembling the unit, clean o-rings and o-ring surfaces, apply a coat
of silicone lubricant to the O-rings. Reposition the internal components in the
casing and tighten the closure ring, turning it in a clockwise fashion.
WARNING --DO NOT apply excessive torque to the closure ring. Over-tightening of the
closure ring could damage the ring and make any future disassembly
difficult.
If you suspect that there are items missing, or if you suspect that there has
been any damage to the equipment, contact Datasonics immediately.
3.2 Connection
The PSA-916 outputs data and receives power through a 6 pin connector.
The PSA-916 is supplied with the mating pigtail and a dummy plug.
Whenever the pigtail is not installed, install the dummy plug to protect the
connector pins.
3.2.1 Connector Pin-out
The functional assignments of the six pin connector is as follows:
Pin Number
Pigtail Color
(Impulse RMG-6-FS)
Function
1 White External key input
2 Black External power ground
3 Blue RS-232 Output/Error Output*
4 Orange Analog output
5 Green Analog output ground
6 Red External power (6 - 24V)