DI-789 Hardware Manual
Installation
7
8.
Enter 255.255.0.0 in the space provided for the
Subnet mask
.
9.
Click on the
OK
button to close the
Internet Protocol (TCP/IP) Properties
dialog box then click on the
OK
but-
ton in the
Local Area Connection Properties
dialog box for the changes to take effect.
Note: If you unplug your device and connect your PC to a network or router you should change the TCP/IP proper-
ties back to their original state.
10. Install W
IN
D
AQ
software (see “Installing Software” on page 10).
11. Run the TCP/IP Manager software (default location is
Start > Programs > WINDAQ > IP Manager
).
12. Connect the device (see “Connecting the Device” on page 11) to your PC or hub.
13. Apply power the device (see “Applying Power to the Instrument” on page 12).
Note: Always start the TCP/IP Manager software BEFORE powering the device to avoid extended delays resolving
IP addresses.
