DI-2160 Event, State, and Count Data Logger
5
Operation
Programmable
functions:
Event, State, Count (alternating current (AC) counter or high-speed (HS) counter
Counter Operation
Reset condition: Programmable interval timeout
Maximum count: 1 second interval:
40
00
1 hour interval: 400,000,000
Maximum frequency:
4
KHz
Minimum
pulse
width:
>
25
0 μs
HS
Counter
Operation:
Used whenever the need exists to account for and totalize each pulse that occurs
within a sample interval
AC
Counter
Operation:
Optimized
for
50/60
Hz
power
line
frequencies.
Designed
to
ignore
power
line
transitions
and
to
change
state
only
when
power
is
removed
or
applied.
State Operation
Determines
the
DURATION
of
an
event.
Records
the
state
that
exists
upon
termination
of
a
sample
interval.
Event Operation
Determines WHEN an event occurred, but does not yield the duration of the event.
Records a single time-stamped data point when one or more events occur within a
definable interval.
Min capture event
pulse width:
>
25
0 μs
Programmable
intervals (applies
to all channels)
1,2,5,10,15,30 seconds; 1,2,3,4,5,10,15,30 minutes; 1,2,4,6,8,12,24 hours
Internal Date/Time Clock
Accuracy: 50 ppm
Sync Method: via connected PC during setup
System Configuration
Method: Via PC-based program; Uploaded via USB port
Parameters: Enabled/disabled
channels;
Sample
interval;
Function
((AC)
counter,
(HS)
counter,
Event,
Pulse);
User
annotation
per
channel
Data Memory
Type: USB drive
Maximum memory size: 32 GB (FAT32 format)
Storage format: ASCII comma separated value (.csv)
