background image

11 Park Place / Paramus, New Jersey  07652
TEL: 201-967-9300             FAX: 201-967-9090

Website:  www. dataprobe.com    Email:  [email protected]

Technical Support Hotline:  (201) 967-8788

 

Overview 

The iP-4xx and iP-8xx series are network attached, IP addressed, Web Controlled, multi outlet, remote A/C power switches.  
The following models are covered in this manual. 
 
iP-820 8 switched outlets, for use on 115 VAC,  20 Amp Service – NEMA N5-20  
iP-420 4 switched outlets, for use on 115 VAC,  20 Amp Service – NEMA N5-20 
iP-815 8 switched outlets, for use on 115 VAC,  15 Amp Service – NEMA N5-15 
iP-415 4 switched outlets, for use on 115 VAC,  15 Amp Service – NEMA N5-15 
iP-810 8 switched outlets, for use on 115/230 VAC, 12 /10 Amp International – IEC 320 
iP-410 4 switched outlets, for use on 115/230 VAC, 12 /10 Amp International – IEC 320 
 

“M”

 suffix designations in the model name indicate models equipped with an internal modem. 

 

Table of Contents 

Important Safety Information 2 

Hardware Installation 3 

iPAL Configuration 7 

IP Address 
Setting up Dial-Up Networking 

Configuration Parameters 

Telnet  Operation 13 

 Web Browser Operation 14 

Specifications 15 

Tech Support & Warranty 16

 

 

REF:  PWR\IP8xx_UL_V020318D.DOC

 

iPAL 

Web Controlled Power Switches 

 
 

Any Networked
PC Running
Web Browser or
Telnet

TCP/IP over 10base-T  Ethernet  

Dial-up

Power Control 4 or 8 Devices

In-Band and Out-of-Band Control

Summary of Contents for IP-410 -

















Reviews: