background image

    

More Power Control Solutions  

8 Outlet Remote Control Power Strips 

 

Rack Mounted 8 outlet power strips can be controlled by Web / Telnet / Modem / 
Serial or DTMF dialing tones.  Visit 

www.dataprobe.com/power/8outlets.html 

Phone Controlled  Power Switch 

 

PowerPAL offers remote control of a 
single A/C outlet using any tone dial 
telephone. PowerPAL connects to an 
existing dial line, and any telephone 
equipment; phone, fax, modem. 
Normal calls pass transparently 
through PowerPAL; only when 
special access codes are detected by 
PAL will the power control functions 
be enabled. User selectable security, 
call processing and power control 
features are examples of such 
capabilities.  Visit 

www.dataprobe.com/power/ppal.html

 

Remote Power C Console Port Access 

 

 
Access four console ports and reboot four devices with this integrated Remote Site 
Manager. From one call you can switch between any of the four serial ports or access 
any of the A/C outlets for complete access and control. The internal modem option 
turns this unit into a completely integrated system that will minimize costly trips to 
remote sites.

  

Visit www.dataprobe.com/power/4pk415.html 

 
 
 
 

 

11 Park Place 
Paramus, NJ 07652 
201-967-9300 

www.dataprobe.com 
[email protected]  

Doc: iBoot15c_021009e 

    

© 2002  Dataprobe, Inc.  All rights reserved 

Summary of Contents for iBoot





















Reviews: