iBoot Ver 1.5 Page 16
Passwords Page
The Change Passwords link on the Setup page allows selection
of new passwords
Two passwords are provided. The first password allows access
to the control of iBoot, but not to the Setup functions. When this
password is used, the main screen will not have a link to Setup.
The Setup Password allows access to both the Main Screen and
the Setup Screen. The default for both Passwords is
PASS.
Passwords can be up to 10 characters long and is case
sensitive.
Enter the current password then the new password twice to
confirm. Click Apply for each password being changed.
OOPS - I forgot my Password
Well, we told you to remember it, but we understand. You can
reset iBoot to its factory default conditions.
Dataprobe provides a iBoot Reset Program for Windows. You
will need to have physical access to the iBoot as well as network
access.
To reset the factory defaults
including the password, use
ibootrst.exe
For security purposes, you will
need to power up the iBoot and
complete the reset to factory
defaults within two minutes.
1. Run ibootrst.exe.
Enter
the current IP address of
iBoot
.
2. Remove and replace the
power to iBoot. You have 2 minutes to complete step 3.
3. Click on the Set Factory Defaults button.
This process does not change the IP address.
Click the
button for information about the utility program.
