Pre-Compliance v180808n
iBoot-WiFi
Page 7
6. Web Browser Operation
6.1. Password Protection
iBoot-WiFi uses two username/password credential sets, one for
power control only (User) and one that also provides access to
the setup functions (Admin). This configuration can be changed
to require Administrator credentials at all times or allow
unsecured User level control. See Section 7.7.
Default Credentials:
Role
Username
(fixed)
Password
(settable)
Administrator
admin
admin
User
user
user
Open your browser and enter the IP address of iBoot-WiFi into
the address bar.
Enter the username and password when prompted. When the
proper username/password is received the Control and Status
Page is displayed.
iBoot-WiFi uses an inactivity timer for security. This timeout is user selectable from 0 to 99 minutes. Setting to zero
disables the timeout feature. When there is no activity for the set time in minutes, the user is automatically logged out
and the username and password will need to be entered again for access. This is to prevent accidental lockout by
leaving the user logged in.
As the iBoot-WiFi allows only one Web user logged in at any time, use caution when disabling the timeout
feature, as it is possible to lock out other users by forgetting to logout. Closing the browser will not log the
user out and will lock out web access. If you do become locked out, access the iBoot-WiFi via Telnet and
reboot the unit, or press the reset button (see Section 11).
6.2. Mobile Browser Support
The standard web pages illustrated in this manual are for screen sizes
700 pixels wide and greater. For devices with screen widths below 700
pixels, the iBoot-WiFi uses a set of mobile browser pages. The
iBoot-WiFi automatically detects the screen size and redirects
automatically to the mobile pages. The mobile pages do not support the
setup functions. To access the setup functions, or to view the full
desktop site, click on the Full Site button.
Figure 6 Authentication
Figure 7 Mobile Browser Pages
iBoot-WiFi V1.18
