Dataplex DPX-213, User Manual

Page: 11 / 93

Section 2
INSTALLATION
Copyright (C) Dataplex Pty Ltd
2-1
2.0 INSTALLATION
Read this Section in order to correctly install your modem. It includes information on
connector pinouts, front and rear panel details and a simple test of your setup.
Before operation is possible, the modem must be setup, either to the factory defaults or
with special S-register values to suit your own configuration.
Most communications software packages issue a default command string to set up the
modem. Before altering this default setup, check the software operations manual and
Section 4, Command Set.
Figure 2.1 Rear Panel Layout
The rear panel of the DPX-213 has a single RJ-11 connector for line, together with a 25
Pin V.24/28 DCE connector. The supplied line cord connects from the RJ-11 of the DPX-
213 to the telephone wall socket. A description of the RJ-11 connectors is given in
Appendix D.
2.1 Setting the Internal Jumpers
The DPX-213 contains a number of internal jumpers which have to be set before
operation. The figure over page shows the location of the various jumpers.