Your packing box should contain the following items:
The VisionSC-HD4+ - Quad HDMI video capture card.
2 x HDMI Splitter Cables, or
2 x DVI Splitter Cables
(For latest drivers go to www.datapath.co.uk).
NOTE:
All plug-in cards are static sensitive and are packed in
antistatic materials. Please keep the card in its
packaging until you are ready to install.
Download the the required driver install.exe from the
Support pages on the Datapath website and follow the
Installation Wizard instructions as prompted.
PACKING LIST
HARDWARE INSTALLATION
SOFTWARE INSTALLATION
We suggest that you regularly visit the Datapath web site
for information on updated drivers.
www.datapath.co.uk
It is strongly recommended that you read the detailed
help instructions on completion of the installation. Each
help topic may be printed for ease of use.
You are likely to need a flat blade and/or a cross head
screwdriver for the installation of the VisionSC-HD4+ card;
it would be useful to have these to hand before you begin.
Power down the PC (including peripherals), switch off at
the mains and disconnect all the cables connected to the
computer, noting the positions for accurate reconnection
Remove the PC cover.
Locate a vacant PCIe slot (x4 or higher) on the motherboard
and remove the backing plate (retain all screws) .
If in doubt consult your motherboard documentation to
correctly identify a PCIe (PCI-express) slot.
Remove the VisionSC-HD4+ card from its packaging and
secure it firmly into the empty PCIe slot.
Screw the VisionSC-HD4+ bracket to the back panel of the
PC and replace the cover. Connect the cable(s) (not
supplied) distributing the signals to the splitter cable(s)
connected to the VisionSC-HD4+ card.
Reconnect all cables to the PC.
