STEP 2 - SOFTWARE
INSTALLATION
Download the required driver and install from the
Datapath website, and follow the Installation Wizard
instructions as prompted.
When installing the display driver you will be offered
the choice of the WDDM driver and the XDDM driver:
WDDM is the driver architecture used by modern
Windows Operating Systems such as Windows
10. The Datapath WDDM driver currently provides
support for up to 12 I cards or 6
Image4K cards.
XDDM is the legacy driver architecture used by
graphics drivers from Windows 2000 through
to Windows 7 and Windows Server 2008 R2.
The XDDM driver currently supports up to
16 I cards. The XDDM driver is not
compatible with Windows 10.
COPYRIGHT STATEMENT
© Datapath Ltd., England 2019.
Datapath Limited claims copyright on this
documentation. No part of this documentation
may be reproduced, released, disclosed, stored in
any electronic format, or used in whole or in part for
any purpose other than stated herein without the
express permission of Datapath Limited.
Whilst every effort is made to ensure that the
information contained in this documentation is
correct, Datapath Limited make no representations
or warranties with respect to the contents thereof,
and do not accept liability for any errors or omissions.
Datapath reserves the right to change
specification without prior notice and cannot
assume responsibility for the use made of the
information supplied. All registered trademarks
used within this documentation are acknowledged
by Datapath Limited.
Image4K
Image Graphics Quick Start Guide
