Quick Start Guide
9
Quick Start Guide
Step 9 - Rack Mounting (Optional)
Remove the stud screws
on the side of your Fx4
and secure the rack
mounts using the screws
provided
Step 10 - IP Control Panel
The Fx4 has a control panel that can be accessed via an IP connection, simply type in the IP address of the Fx4 into an Internet
browser and a control panel for that particular Fx4 is displayed. The control panel allows you to change properties and settings,
manually define cropping regions, upload your particular logo or open the Wall Designer application.
Step 11 - Trouble Shooting
Display Screens Turn Red
If all the display screens turn red, this indicates that there is an issue with HDCP compliance. Check both the input source and
the monitors are HDCP compliant.
Front Panel LED Lights
On start-up all three lights will flash, after a few seconds the flashing should stop and the power light stays on permanently. If
the light continues to flash this indicates that the Fx4 requires upgrading. See User Guide for details on how to upgrade your
Fx4.
