Connect the Arqa RX1/F and the TX1/F as follows using the connection illustration as a guide:
Connect both the Arqa RX1/F and the TX1/F to the 12V 1A power supply provided.
Connect the USB cable (provided) to a USB Port on the PC and to the USB port on the Arqa TX1/F.
Connect a keyboard and mouse to the USB ports on the Arqa RX1/F.
Connect the Arqa RX1/F and TX1/F using a fiber cable (not supplied) connected to the SFP
modules in each unit.
Connect the supplied DVI cable to the DVI output on the PC to the DVI input on the Arqa TX1/F.
Connect a monitor to the DVI - out socket on the Arqa TX1/F.
If using a network switch, connect all endpoints from the Arqa units to the switch. Ensure that all
connections have a minimum bandwidth of 1 Gbit/sec. For video sharing the network switch must
support IGMP snooping.
Removing a Fiber Cable
To remove a fiber cable:
Press the latch down and slowly pull the cable out.
13
Arqa User Guide
Summary of Contents for Arqa TX1/C
Page 38: ...NOTES 38 Arqa User Guide...
Page 39: ...NOTES 39 Arqa User Guide...
