STEP 3 OPERATION
Start up a point-to-point connection (without a network switch)
The start up for a point-to-point connection is the same whether you are using the Copper
or Fiber version of the Datapath Arqa.
Ensure all connections between the PC, Arqa TX1 and the RX1 are sound.
Turn on the PC and both monitors.
Both units will start an initialisation process indicated by the red status LED flashing for
a few seconds, then turning solid Green.
Press the Scroll Key on your keyboard five times in quick succession to open the
On Screen Display menu then enter ‘P’ to
enable Point-to-Point mode.
The monitor will display the desktop of the PC and any open applications.
Single point-to-point connection
Switching System connections
Arqa RX1
Screen, Keyboard
& Mouse
Arqa RX1
Screen, Keyboard
& Mouse
Arqa RX1
Screen, Keyboard
& Mouse
Arqa RX1
Screen, Keyboard
& Mouse
Arqa RX1
Screen, Keyboard
& Mouse
Network Manager Server
Network
Switch
Up to 2000
Endpoints
PC
Arqa TX1
PC
Arqa TX1
PC
Arqa TX1
PC
Arqa TX1
PC
Arqa TX1
Screen, Keyboard & Mouse
Distance up to 150m Copper / up to 500m - Fiber
PC
Arqa TX1
Arqa RX1
7
Arqa Quick Start Guide
