Datamax PrintPAD Series User Manual Download Page 31

Page: 31 / 145

PRINTPAD MC70 USER'S GUIDE

Using a CardReader

General Guidelines



To wake up the CardReader, insert a card into

the CardReader slot. One short beep indicates

the CardReader/printer is awake.



If you are using a Magnetic CardReader, insert a

card with the stripe facing away from the printer.



For information on CardReader LED indicators

and audio indicators, see

CardReader Indicators

on page 16.

CardReader Indicators

Audio Indicators

Note: The following information applies to printers with

the CardReader option.

Beep

Description

Action

1 long

Bad read.

Swipt card again.

2 short

Good read.

None.

Figure 14

Summary of Contents for PrintPAD Series


















































































































































Search results

Summary of Contents for PrintPAD Series

Reviews:

Related manuals for PrintPAD Series

Brands by name

Popular brands

Datamax PrintPAD Series, User Manual

Search results

Summary of Contents for PrintPAD Series

Reviews:

Related manuals for PrintPAD Series

Brands by name

Popular brands