Datamax MA100-1010, User Manual

Page: 41 / 109

41
BG-Mixed
：
Support 802.11b, 802.11g wireless devices.
B-only
：
Only supports the 802.11b standard wireless devices.
G-only
：
Only supports the 802.11g standard wireless devices.
NG-Mixed
：
Support 802.11g, 802.11n wireless devices.
N-only
：
Only supports the 802.11g standard wireless devices.
8021.11n Transmission Mode
：
In the wireless network mode "N-only", you
can select:
Greenfield: If no other WiFi coverage is in the area, this mode will
increase throughput. However, when this mode is used where other WiFi
is present, throughput will decrease.
Mixed
：
When other WiFi coverage is in the area, this mode reduces
errors. However, when used where no other WiFi is available, this
decreases throughput.
Wireless Network Name(SSID) : The SSID is the network name shared
among all devices in a wireless network. The SSID must be identical for all
devices in the wireless network. It is case-sensitive and must not exceed
32 alphanumeric characters, which may be any keyboard character.
Make sure this setting is the same for all devices in your wireless
network.
。
Wireless Channel
：
A total of 1-13 channels to choose more than one
wireless device environment, please try to avoid using the same channel
with other devices.
。
Channel Width
：
20MHZ and 40MHZ
。
Extension Channel
：
Channel for 40MHZ, you can choose upper or lower.
Wireless SSID Broadcast
：
Enable
：
SSID is announced and advertised by the router
Disable
：
SSID is not advertised – you cannot “browse” this network to
connect, you must know it exists.
Network Configuration
：
Bridged
：
Bridge to the router, under normal circumstances, please
select the bridge.
Unbridged
：
There is no bridge to the router, IP addresses need to
manually configure.