38
Enter relevant bridge IP address and subnet mask, click 'Add' to
create a bridge.
Note: Only create a bridge can apply it.
Assign to Bridge option: to assign different ports to created bridge. For
example: assign port (wireless port) is ra0 in br1 bridge as below:
Prio means priority level: work if multiple ports are within the same
bridge. The smaller the number, the higher the level. Click 'Add'
to take it effect.
Note: corresponding interface of WAN ports interface should not be
binding, this bridge function is basically used for LAN port, and
should not be binding with WAN port
If bind success, bridge binding list in the list of current bridging table is
as below:
To make br1 bridge has the same function with DHCP assigned
address, users need to set multiple DHCP function, see the
introduction of multi-channel DHCPD:
Summary of Contents for MA100-1010
Page 20: ... 20 ...
Page 109: ... 109 ...
