14
Picket Fence
Bar Code
Scanner
Printhead
Assembly
LED
Note: Ensure that the Scanner is enabled in the following steps.
5) Press
MENU
. Press
DOWN
or
UP
to scroll to DIAGNOSTICS and then press
Enter
. Scroll to
OPTIONS TESTING and press
ENTER
.
Scroll to TEST SCANNER and press
ENTER
. Select
ALIGNMENT TEST and press
ENTER
.
6) Observe the LED (or the displayed SCAN COUNT) then proceed accordingly:
If the green LED is illuminated (or if the count increments rapidly), press
EXIT
to end the test (see
“Troubleshooting” if problems persist); or
If the green LED is not illuminated (or if the numbers do not increment, or increment slowly),
proceed according the Scan Position:
•
10-Mil Scan Position, go to Step 7; or,
•
5-Mil Scan Position, go to Step 9.
Note: When making adjustments, avoid contact with the Scanner Window; otherwise, see
Maintenance for cleaning details.
7) Loosen
the
Thumbscrew and then slide the Scanner to the rightmost position on the Mounting
Bracket.
