4
Step 4: Configuring the Printer
While the Present Sensor is a plug and play device, this step may be necessary if the printer’s default
configuration has been changed. Follow the steps below to configure the printer:
Note:
In the following procedure, consult the Operator’s Manual for detailed front panel instructions.
A)
Press the
MENU Button
on the printer’s front panel.
B)
Using the
DOWN Button
, scroll to
PRINTER OPTIONS
then press the
RIGHT Button.
C)
Using the
DOWN Button
, scroll to
PRESENT SENSOR
then press the
ENTER Key
.
D)
Using the
DOWN Button
,
scroll to
MODE
then press the
ENTER Key
.
E)
Using the
DOWN Button
,
scroll to
AUTO
then press the
ENTER Key
.
F)
Press
the
EXIT Key
then, at the
SAVE CHANGES?
prompt, select
YES
to complete the installation.
G)
Turn the
Power Switch
‘Off’ and ‘On’ to reset the printer and complete the configuration.
Summary of Contents for H Class
Page 2: ......
