Datamax E Class E-4203, Operator'S Manual

Page: 25 / 92

E-4203/E-4204/E-4304 15
3.4 Loading Ribbon
Ribbon is required with thermal transfer media. If your printer is
equipped with the thermal transfer option and if you will be using thermal
transfer media, load ribbon as follows:
1. Open the cover.
2. Remove both
Ribbon Hubs.
3. Slide a roll of
Ribbon onto one
of the Ribbon
Hubs and an
Empty Core onto
the other hub.
Ribbon
Empty Core
Slide a Ribbon onto a Hub and
an Empty Core onto a Hub
Push in and lift
to remove the Hubs
4. Push the
Printhead Latch
down and raise
the Printhead
Carrier
Assembly.
5. Slide the Media
Type Switch into
the ‘Transfer’
position.
Media Type Switch
Direct
Transfer