Datamax E-class E-3202, Programmer'S Manual

Page: 32 / 39

E-3202 Programmer’s Manual 27
In the next command we will select a new font size using the GS !
For more information on this command refer back to Selecting character size. We set the size to a width of 4 and a height
3. That will give us a Dec W of 48 and a Dec H of 2.
↔
!(Dec W+Dec H)
↔
!(48+2)
↔
!(n=Dec value of 50)
↔
!(
Alt 50)
The command should come out as:
↔
!2
2
is the ASCII Character for the Decimal value 50. Refer to ASCII Table for information on characters.
*NOTE: This command follows up on previous command is entered without any carriage returns. See below for
sample:
←
@
↔
!
←
a
-
Datamax Corporation
Matt & Derek
European Tech Support
Feb 2000
DMX-E-3202
POS/Label Printer
ESC/POS Print Examples
↔
!2
White/black reverse Printing
GS B n
On: n=1
Off:
n=0
The default setting is 0. This mode is turned on before the text you would like to be reversed and the turned off after the
text.
↔
B
-
The command is turned on
↔
B
The command is turned off
∗
This is only to show that there should be a NUL value in the command. In
order to create the NUL value we use
Ctrl+Shift+2
, (using the ‘2’ from the top of
the keyboard and not the number pad)
. The cursor on the screen should move
one character to the right without anything displayed on the screen. If you
were to do a Hex Dump you will see a 00 Value.