Datamax E-class E-3202, Programmer'S Manual

Page: 28 / 39

E-3202 Programmer’s Manual 23
Sample Programming
Programming the E-3202
When programming the E-3203 using EDIT in DOS you need to first make sure that your keyboard is set to United States
style. This can be done by using the Keyboard Properties window located in the Windows Control Panel. Add a keyboard
by selecting the Add key on the panel, then add the English (United States) keyboard.
Before starting to program make sure that the Baud rate in the printer is set the same as the COM port on the PC. Next we
need to set the Emulation on the printer to ESC/POS.
In the Configuration Label there's a division called Character sets. In this set we see that the character size is 12 * 24 for
this label. Therefore the default value of n=0 (NUL). Make note of this for later reference. Command GS ! n
You are now ready to start with programming a label for this printer.