Datamax A-Class Programmer'S Manual Download

Page: 173 / 330

Generating Label Formats

Class Series 2 Programmer’s Manual

161

Advanced Format Attributes

Two different advanced formatting attributes extend the text presentation capabilities.

The first format attribute allows a set of label format records to make a

state change

that modifies the font attributes of any following DPL text records. The second format

attribute provides a means of inserting text and font formatting commands directly into
the DPL data stream via a

command delimiter structure

. All label formats begin by

default with attributes disabled.

The table below represents the current list of font attributes available to the user. Note

that these commands are delimited by the \<

xxx

> sequence (where

xxx

is from the list

below).

Command

Units

Purpose

Notes

+/-

Turns on or off font boldfacing.

+/-

Turns on or off font italicization.

+/-

Turns on or off underlining of string.

minus “-” is disable; or,

plus “+” is enable

Points

Specifies the vertical point size of the
following text relative to the base line.

Points

Specifies the horizontal point size of the
following text relative to the base line.

FR[+/-]

Degrees

Specifies the rotation of the base line,
relative to the original print direction of the

record.

If a + or – precedes the
numeric value, then the

direction is relative to the

current print direction.

Table 8-16: Advanced Format Attributes



These commands are only valid for scalable fonts, such as Internal Font 9, S00, S01, or

downloaded TrueType scalable fonts. (Some models have limited standard font sets and

capabilities; see the notes below for applicability of commands and consult the
appropriate

Operator’s Manual

for available standard and optional font sets.)

For example, the first format attribute command can be illustrated as follows. The text

below and the resulting label (Figure 1) are examples of a current DPL format:

Summary of Contents for A-Class











































































































































































































































































































































Search results

Summary of Contents for A-Class

Reviews:

Related manuals for A-Class

Brands by name

Popular brands

Datamax A-Class, Programmer'S Manual

Search results

Summary of Contents for A-Class

Reviews:

Related manuals for A-Class

Brands by name

Popular brands