Copyright © 2007 • MCL Technologies • All Rights Reserved
www
.mcl-collection.com
Chapter 3 : Creating a Project
Returning to the Warehouse Shelving example started in
Section 3.3.2 -
Variables
, the following describes how the LocationMCL2.btw label
would be mapped using the variables created in the example.
2
Double-click on the Replace By field for the first entry in the
Mapping table – this element is the first of the two Barcodes on the
example label
The Variables list is displayed as shown here
3
Select the Location variable ( [A0] Location )
4
Click OK
The variable [A0] Location is mapped to the first barcode as shown
below. When the label is printed, the contents of the [A0] Location
variable will be printed as a barcode where the barcode “location” was
printed in the static label.
5
Double-click on the Replace By field for the second entry in the
Mapping table – the Human Readable beneath the first Barcode
October 2007
Page
84